• Fast curing
• High grab - holds grass in place whilst curing
• Green colour
• Bonds in damp conditions
• Bonds to most substrates
• Odorless
• Solvent and water free

• Super-fast adhesive application speed
• Increases coverage by up to 25%
• 180mm nozzle perfectly suited to a 200mm seam tape (standard size)
• Disposable multi-bead nozzle heads - no cleaning required
• Adhesive sachets compress to a small flat disc - minimal waste

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Most construction grade materials are suitable such as wood, concrete, brick, insulation materials, porous and non-porous.

Slight moistening of substrates improves the curing rate and gap filling properties. We recommend a preliminary compatibility test before bonding of desired substrates. The adhesive should be applied within the temperature range of +5˚C to +25˚C.

• Unscrew the applicator head, cut the tip of the Turfstikk 200 3ltr adhesive foil and insert into the G1 applicator.
• Replace the applicator head ensure the dispensing holes in the multi-bead nozzle are facing towards the substrate.
• Set the flow speed to your desired rate and squeeze the trigger, slowly walking backwards to ensure an even coverage. 
• Join the parts together within 10 minutes.
• Pressing the materials during curing is necessary to obtain the highest bond strength.

Cured adhesive has to be removed mechanically.

Not recommended for use with plasticised vinyl’s, flexible plastics, expanded/extruded polystyrene, PE or PP.

Always test Turfstikk 200C to determine suitability for your particular application prior to use in production.