• Fast curing
• Green colour
• Bonds in damp conditions
• Bonds to most substrates
• Solvent free
• High strength
• Superior bond strength to others on the market
• High coverage rate

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. 

Slight moistening of substrates improves the curing rate and gap filling properties. The 2-component R300 adhesive is best used between 5ºC-30º. Beware of too much water. We recommend a preliminary compatibility test before bonding of desired substrates.

Mixing instructions:

• Mix 'part A' thoroughly using the Henko mixing tool or similar item.
• Leave to rest for 2-3  minutes before adding 'part B'.
• Ensure that Part A and B are mixed together thoroughly for a recommended time of at least 2 minutes and with the Henko mixing tool.
• Leave to stand for approximately 10 minutes before applying to the grass.
• Use the Henko glue box or a hand trowel to distibute an even amount of adhesive on to the desired area or seam tape.

Pressing the materials during curing is necessary to obtain the highest bond strength and should be done within the 20-30 minute open time. Presuure upon joints is always advised to obtain the highest bond strength.

Cured adhesive has to be removed mechanically.

Henko R305 should be stored in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 9 months. Do not allow freezing of the adhesive under any circumstances.

Not recommended for use with plasticised vinyl’s, flexible plastics, expanded/extruded polystyrene, PE or PP.

Always test R305 to determine suitability for your particular application prior to use in production.

The following products are recommended for use with the Henko H700 adhesive:

• Henko glue box
• 200mm seam tape (for landscaping)
• 300mm seam tape (for sports pitches)